Plug your Micro SD card Adapter with your SD card to the computer.

Download Etcher and install the application on your computer.

Download and install The latest Raspbian OS which can be found on Raspberry Pi.

The YouTube tutorial equivalent also outlines this. You could find more information on how to install the latest Raspbian OS on the Raspberry Pi site. The Raspbian OS was flashed onto the 32 GB Micro SD Card. Installing Raspbian Buster Etching Raspbian OS to MicroSD Looking from hindsight – We recommend a monitor with HDMI ports on the side of the Monitor The LED strips also includes a remote for changing LED colours. The strips included an adhesive coat to the back which allowed us to peel and wrap the strips around the Monitor. LED strips were added to give the mirror a nice ambient glow. LED Strips: Smart Mirror – LED Strips Assembly An Interior varnish coat was added to the frame to give it a nice glossy finish. An opening on the strap was made to allow space for HDMI ports on the monitor for the Raspberry Pi display input.

The final mirror dimensions were W 47.6cm x L 77cm x H 7cm.Ī monitor strap/ back support was added to secure the support of the Frame. Strong PVA (Gorilla) glue and nails were used to re-enforce the frame. This was assembled using 1×4 Fiberwood from your local DIY store, and a hacksaw to cut the dimensions. (However, your build can be left to your creativity). IR Frame built from Fibreboard Building Mirror Frame And Assembly of partsĪ wooden frame was built In order to encase the 32 inch Monitor.

This information is relayed back to your Raspberry Pi corresponding to your display. Similar to an optical mouse USB peripheral, based on where you touch the frame a beam interruption occurs and the IR sensor is able to co-ordinate where you’ve touched.

Typically IR frames have LEDs on one side of the frame and Light detectors on the opposite side. IR frames are based on light-beam interruption.

Ir over hdmi raspbian cec